E-Z-GO TXT48 DC Torque Bundle
A torque-oriented D&D motor with a D&D-supplied Alltrax controller and cable kit, plus an MZJ contactor.
Included — one of each
- Alltrax XCT48400TXT48 400A controller.
- D&D 170-502-0001 high-torque regen motor.
- DD-WIRE-EZGO-REGEN-4AWG D&D cable kit.
- MZJ-400D-48 48V-coil contactor.
Confirm the exact TXT system
For compatible factory-TXT48 separately excited DC systems with the matching16-pin controller architecture. Check original controller, throttle,19-tooth motor spline, motor outline/mounting, shock clearance and battery/cable routing. Not PDS,DCS,series,RXV AC or automatically compatible with factory-lithium ELiTE electronics. This is not an AC or battery-voltage conversion.
Torque-focused describes the winding, not heavy-duty approval. The supplied4AWG cables meet standard-duty400A XCT requirements. Heavy-duty operation requires2AWG or larger per Alltrax. Motor/controller programming and operating current must remain within all component limits. Performance varies with the vehicle.
Supporting parts
Verify MZJ48 coil-drive,current and mounting requirements. Its published switched-circuit maximum is60V DC, including maximum operating voltage. Battery,charger,labor,additional adapters,fuse and separately required diode/pre-charge parts are excluded. Modified installations require approval.
Photos are representative component-family references. Exact connectors and cable lengths follow the listed application and supplier packing list.
Motor/controller guide · Cable guide · MZJ guide
Bundle SKU: BNDL-DD-TXT48-400-TRQ