Club Car IQ 48V Speed-Focused DC Bundle
Four individually specified components: a D&D-supplied motor, Alltrax controller and cable kit, plus an MZJ contactor. This package retains a separately excited DC drivetrain; it is not an AC conversion.
Included — one of each
- Alltrax XCT48400IQ 400A controller.
- D&D 170-506-0002 high-speed regen motor.
- D&D DD-WIRE-CC-IQ-6X8-4AWG cable kit for six 8V batteries.
- MZJ-400D-48 contactor with 48V coil.
Match your cart before ordering
For compatible 48V Club Car IQ-family DC applications with the six-8V battery layout. Confirm the original controller, IQ versus i2/Excel throttle configuration, 10-tooth motor spline, mounting and full suspension-travel clearance. Not a Regen I/II, series, factory-AC or automatically approved lithium application. Four-12V and relocated-battery layouts need a different cable check.
Speed-focused does not mean increased torque. This motor winding prioritizes speed; vehicle results depend on batteries, gearing, tires, load and programming. No speed or torque result is guaranteed.
Installation requirements
The included 4 AWG cables meet Alltrax's standard-duty 400A XCT minimum; heavy-duty use requires at least 2 AWG instead. Set the correct motor-specific field map and safe current limits. Verify the MZJ coil-drive requirements and keep the switched circuit within its published 60V DC limit, including maximum system voltage. Controller amperage is not an unlimited continuous rating.
Battery, charger, labor, additional mounting adapters, fuse and separately required suppression/pre-charge components are not included. Obtain approval for modified applications before ordering. Reference photos show component families; exact connectors and cable lengths vary by specified application.
Controller and motor guide · Cable sizing guide · MZJ requirements
Bundle SKU: BNDL-DD-IQ6-400-SPD