Yamaha G19 / G22 48V DC Speed Bundle
Motor,Alltrax controller and cable kit sourced through D&D,plus an MZJ contactor. This four-piece package requires the correct original-controller configuration.
Included — one of each
- Alltrax XCT48400G19/22 400A controller.
- D&D 170-506-0001 high-speed regen motor.
- DD-WIRE-YAM-G19-G22-4AWG D&D cable kit.
- MZJ-400D-48 contactor,48V coil.
Two essential checks
GE versus MORIC: Send the original controller label and connector photos before ordering; the Alltrax replacement configuration must match. This listing does not make both controller configurations interchangeable.
Motor clearance: D&D flags lift/fabrication requirements for this Yamaha motor family. Verify motor outline,19-tooth spline,shock and speed-sensor clearance through full suspension travel. A stock non-lifted cart is not an approved automatic fit. Confirm battery layout and cable lengths. Not G29,gas or factory AC.
Installation requirements
Use the exact motor-specific field map and safe current limits.4AWG is Alltrax's standard-duty400A XCT minimum; heavy duty requires2AWG. Verify MZJ48 coil drive,contact rating,mounting and maximum60V DC switched circuit,including maximum operating voltage. Speed-focused does not promise an MPH or torque result.
Battery,charger,lift/fabrication,labor,additional adapters,fuse and separately required suppression/pre-charge parts are excluded. Obtain approval for modified applications. Photos are representative; cable picture is a family example,not an exact G19/G22 packing list.
Motor/controller guide · Cable sizing guide · MZJ guide
Bundle SKU: BNDL-DD-Y1922-400-SPD