Yamaha G19 / G22 48V DC Speed & Torque Bundle
D&D supplies the combined speed/torque motor, Alltrax controller and cable kit. The MZJ contactor is the only separately sourced component.
Included — one of each
- Alltrax XCT48400G19/22 400A controller.
- D&D 170-516-0003 high-speed/high-torque regen motor.
- DD-WIRE-YAM-G19-G22-4AWG D&D cable kit.
- MZJ-400D-48 48V-coil contactor.
Check controller configuration and clearance
GE or MORIC must be identified before ordering. Send the original controller label and connector photographs so the Alltrax configuration can be matched.
D&D flags lift/fabrication requirements for this Yamaha motor family. Verify the exact motor outline, 19-tooth spline, shock and speed-sensor clearance throughout suspension travel. A stock non-lifted cart is not an approved automatic match; a lift alone does not guarantee clearance. Confirm the battery/cable arrangement. Not G29, gas or factory AC.
Electrical requirements
Set the exact motor field map and safe current limits. Included 4 AWG cables meet standard-duty 400A XCT sizing; heavy duty requires 2 AWG. Verify MZJ48 coil drive, contact rating and maximum 60V DC switched circuit, including the highest system voltage. Motor style is not a promised vehicle-speed or torque result.
Battery, charger, lift/fabrication, labor, additional adapters, fuse and separately required pre-charge/diode parts are excluded. Modified applications need approval. Photos are representative component families; the cable image is not an exact application packing list.
Motor/controller guide · Cable guide · MZJ guide
Bundle SKU: BNDL-DD-Y1922-400-BAL