E-Z-GO TXT 36V Series Speed Bundle — 1996-Up
Four specified parts, with the motor, Alltrax SR controller and cable kit supplied through D&D. MZJ is the only supplier exception.
Included — one of each
- Alltrax SR48400 400A series controller.
- D&D 170-006-0001 high-speed series motor.
- DD-WIRE-EZGO-SERIES-96-4AWG D&D cable kit.
- MZJ-400D-36 36V-coil contactor.
Not a PDS or DCS package
For compatible 1996-up E-Z-GO TXT 36V series-motor configurations. Check actual series drivetrain, 19-tooth spline, motor outline and clearance, original controller, battery arrangement and cable lengths. Not DCS, PDS, factory TXT48 or RXV AC. The included cable kit establishes the narrower application limit.
The motor prioritizes speed rather than torque. Vehicle performance varies with batteries, load, tires, gearing and programming.
Installation
Configure the SR for the actual throttle, including the correct ITS setup where applicable. Verify current limits, forward/reverse switch rating and any required mounting adapter. Supplied 4 AWG cabling meets the SR400 manual minimum; check the actual installation and duty.
Confirm MZJ36 coil drive, contacts and mounting, with maximum switched-circuit voltage within the published 60V DC ceiling. This package does not convert battery voltage. Battery, charger, labor, additional adapters, fuse and separately required diode/pre-charge parts are excluded. Obtain approval for modified applications. Photos are representative.
Series-controller guide · Cable guide · MZJ guide
Bundle SKU: BNDL-DD-EZS36-400-SPD